Password Creation - Night Owl CM-IH8-BA User Manual

When the firmware for your NVR is updated to the most current version, the Startup Wizard will display the
below screen.

6.1.4 Password Creation

The Password Creation screen of the Startup Wizard requires you to create an admin password for your NVR
system. Night Owl strongly suggests that you write down your admin password within the Quick Setup Guide
of your NVR, as you will be required to log in any time you want to configure or adjust your system settings.
This screen will also require that you set a recovery email address in the event that your admin password is
forgotten. To change your recovery email address, you MUST rerun the Startup Wizard.
NOTE: You will not be able to complete the Startup Wizard unless a recovery email address is established.
27