Nvr Diagram - Night Owl CM-IH8-BA User Manual

3.2.1 NVR Diagram

Once you have downloaded Night Ow HD and connected your NVR to your router, you can network your NVR
by scanning the QR code which is located on the top of the NVR.
QR Code
1
LINE IN
AUDIO OUT
2
Line In – Allows for the connection of an external microphone.
1
Audio Output – Allows for the connection of an amplified speaker using an RCA connector.
2
VGA Output – Allows for the video connection. If the TV/Monitor has a VGA input, connect the VGA
3
cable from the VGA output port on the NVR to the VGA input port on your TV/Monitor (VGA Cable
not included).
HDMI Output – Allows for the video connection. If the TV/Monitor has an HDMI input, connect the
4
HDMI cable from the HDMI output port on the NVR to the HDMI input port on your TV/Monitor.
USB Ports – Allow for the connections of a USB mouse and/or a USB flash drive. You will connect
5
the included USB mouse to assist you in navigating the NVRs menu interface. You will connect a
USB flash drive to download video files from the NVR and save them to your USB flash drive.
Video Inputs – Allow for the connection of IP cameras.
6
RJ-45 (Ethernet) Port – Will be used to connect the NVR to your router/modem via the included
7
Ethernet cable.
Power Input – To connect the included 48V DC power supply.
8
USB 3.0
VGA HDMI USB 2.0
3 4 5
Images used are for reference only. Your product may vary slightly.
A 16 channel model is displayed above.
FRONT VIEW
Model #
REAR VIEW
CH15 CH13 CH11 CH9 CH7
CH16 CH14 CH12 CH10 CH8
6
13
POWER
CH5 CH3 CH1
ON / OFF
CH6 CH4 CH2 LAN 48V / 3.75A
7 8