6.1.1 Camera Test
The Camera Test screen of the Startup Wizard serves as a reminder to test the camera connections to the
NVR. If a connected camera displays a "No Signal" message, please visit
on the Support tab.
6.1.2 Network Check
The Network Check screen of the Startup Wizard displays instructions for how to connect your NVR to the
Internet. You will need the included Ethernet cable to establish connection, your NVR will not be able to
wirelessly connect to your router/modem. Once you have made the required connection using the Ethernet
cable, you may click Test within the Startup Wizard to confirm Internet connection.
www.NightOwlSP.com
24
and click