To Cancel Buzz Zones; Chime Zones; To Program The Chime Zones; To Cancel The Chime Zones - Inhep Digital Security IDS 805 User Manual

Hide thumbs

Table Of Contents

Table of Contents

13.2

Hold down the [4] key until the keypad buzzer sounds. The AWAY indicator will flash to show that

the panel is armed in the Buzz zone programming mode.

Press the [NUMBER] corresponding to the BUZZ zone you wish to cancel.

The relevant zone indicator will turn off.

Repeat step 2 until all buzz zones are cancelled.

Press the [#] key to exit the buzz zone programming mode.

NOTE:

The system will automatically exit this mode after 60 seconds.

14.

The chime mode allows the user to monitor nominated zones while the system is disarmed. The keypad

buzzer will sound 5 times when the nominated zone is violated - the siren will NOT sound and no alarm

condition will be reported.

EXAMPLE:

You wish to know when someone enters or exits the front door; the keypad will beep each time the door

is opened if that zone is programmed as a chime zone.

14.1

Hold down the [2] key until the keypad buzzer sounds.

The AWAY indicator will flash to show that the panel is in the chime zone programming mode.

To program a zone as a chime zone, press the key corresponding to that zone. The zone

indicator will come on.

Program any other zones you wish to select as chime zones as per step 3.

Press the [#] key to exit the chime programming mode.

14.2

Hold down the [2] key until the keypad buzzer sounds.

The AWAY indicator will flash to show that the panel is on the chime programming mode.

To cancel any chime zones, press the key corresponding to that zone. The zone indicator will

turn off.

Repeat step 3 until all the chime zones are cancelled.

Press the [#] key to exit the chime programming mode.

NOTE:

The system will automatically exit this mode after 60 seconds.