Medical Alarm; Duress Code; Emergency Evacuation Plan; System Memory - Inhep Digital Security IDS 805 User Manual

automatically after the programmed SIREN TIME OUT period.
Ensure that your installer has enabled this function if it is required.

Press this key only in an emergency situation that requires response by emergency personnel.

8.3
If the [M] key is pressed until the keypad beeps (approximately 1 second) a MEDICAL ALARM

condition will be activated.
The keypad's buzzer will sound rapidly for 5 seconds to indicate that a medical alarm has been

initiated.
8.4
This special 4 digit user code should only used in the unique situation where an intruder forces

one to disarm the system "under duress".
When the [DURESS CODE] is entered, the control panel disarms normally - however a DURESS

REPORTING CODE is trans mitted to the monitoring company to inform them that you have been
forced to disarm the control panel by an intruder.
It is advisable to choose a code that can be easily remembered by all family (or staff) members.

9.
An emergency evacuation plan should be established in case of a fire:
Draw up a floor plan of your premises showing windows, doors, stairs, and rooftops that can be

used for escape.
Indicate a suitable escape route for each room. Always keep these routes free of obstruction.

Establish a meeting place outdoors for a headcount of the building's occupants.

Practice escape procedures.

10.
10.1
The Alarm Memory displays any zones which were violated the last time the system was armed. If the
ARMED indicator is flashing before you disarm the system, a violation has occurred. To view which zone
was violated, disarm the panel, and continue as indicated below.
To Display Alarm Memory:
1. Hold down [0] until the keypad buzzer sounds.
2. The READY indicator will turn off and the keypad buzzer will sound briefly.
3. Flashing zone indicators show which zones were violated during the last armed period.
4. The memory status will be displayed for five seconds, or until the [#] is pressed.
16

Medical Alarm

Hold down the [M] key until the beep

Duress Code

[#] + [DURESS CODE]

Emergency Evacuation Plan

System Memory

Alarm Memory

Hold down the [0] key until the beep
IDS 805 User Manual 700-266-01C Issued March 2009