Turning Off Specific Parts (Mute) - Roland MT-90U Owner's Manual

MT-90U Basic Operation
3.
Press button [1].
The part displays a [●] above the track number, which signifies that only this part is set
to play.
<Fig17.eps>
If you want to change the solo part after pressing button [1], press buttons [3] or [4] to
change parts and the solo setting moves as well.
4.
Press the [
Only the selected part begins to play.
5.
To cancel solo play, press button [1] again.
All parts begin to play.

Turning Off Specific Parts (Mute)

Here's how to specify which parts to play and which parts to mute.
NOTE
1.
Press button [2] while pressing the [
The 16 track screen appears.
<Fig16.eps>
2.
Press buttons [3] or [4] to move to the part that you want to play.
3.
Press button [2] to set parts to [●] (play) or [❍] (mute).
Pressing button [2] switches the screen between play [●] and mute [❍].
You can also press the [-] button to mute the part [❍], or press the [+] button to play the
part [●].
<Fig18.eps>
4.
Press the [
Muted parts [❍] do not play. These are the parts that you can play to gain practice.
40
(Play)] button to begin playing the song.
Solo and mute settings are cancelled when you leave the 16 track screen.
(Play)] button and the specified parts of the song play.
(Song)] button.