Screen; Basic Screen; Marker Screen; 16 Track Screen - Roland MT-90U Owner's Manual

Screen

Basic Screen

When you turn the power on, the following screen appears.
<Fig1.eps>
Song Number Song Title
Measure No. Time Signature
When in other screens, pressing the [
or more times takes you back to the basic screen, after you've
navigated to other screens.

Marker Screen

Press the [ (Mark)] button and the marker screen
appears. This screen is where settings for makers are mode (p.
30).
<Fig2.eps>
Measure No. Marker A Marker B

16 Track Screen

Press button [2] while pressing the [
the 16 track screen appears (p. 39).
You can work on each part of the song individually from this
screen.
Settings made in this screen become ineffective when you
return to the basic screen.
<Fig4.eps>
Track Playback Status
Measure No. Time Signature Tempo
Tempo
(Song)] button one
(Song)] button, and

Settings Screen

A variety of settings can be made in this screen (p. 47). When
the setting contains multiple items that you can change, arrows
appear in the upper right-hand corner of the screen. Press the
[ (Bwd)] or [ (Fwd)] button to select an item, and
then use the [+] or [-] button to change its value.
<Fig4.eps>
Item
Setting Value
If a number preceded by the word "Error"
appears, such as [Error : 00], see "Errors and
Other Displays" (p. 60).
Please note that this manual explains various
functions using screen depictions. However, the
unit's factory default settings, including tone
names, and the settings appearing in the screens
depicted in this manual may differ.

Folder Screen

Select a folder and the following screen appears (p. 20). Press
the [ (Play)] button to go inside the folder.
<Fig36.eps>
To move up one folder level, press and hold [-] until "Up"
appears, and then press the [
Panel Descriptions
Previous Item
Next Item
(Play)] button.
11