Roland MT-90U Owner's Manual page 21

3.
Press the [
The song starts playing. The song automatically plays until the end and then stops.
4.
To stop playing the song, press the [
When the song is stopped, a [+] appears next to the measure number at which it is
stopped.
Rewinding and fast forwarding a song
<fig.01-05.eps>
1.
Press the [
music you want to hear.
Press the [
forward one measure at a time.
Press and hold the buttons to rewind or fast forward through a song. You can also rewind
or fast forward a song while it is playing.
Display
When the song has a pick up measure (notes start before the first full measure), "PU"
appears in the display and then the measure numbers appear.
(Play)] button.
If you connect a pedal switch (Roland DP-2, sold separately) to the Start/Stop connector
on the rear panel, you can start and stop playing a song by simply pressing the pedal
(p. 53).
Backward
(Bwd)] or [
(Bwd)] or [
When a song starts to play, the measure number on the display flashes. This flashing
indicates that the MT-90U is reading the data from the USB memory. While the number
is flashing, you cannot rewind or fast forward. Wait a short while and then try again.
Folder
Press the [ (Play)] button to enter the folder.
Up one folder
Press the [ (Play)] button to move up one folder.
(Stop)] button.
Forward
(Fwd)] button to move to the sections and measures of
(Fwd)] button once and the song moves backward or
MT-90U Basic Operation
Description
21