Marking A Section To Repeat For Practice - Roland MT-90U Owner's Manual

MT-90U Basic Operation

Marking a Section to Repeat for Practice

By marking a song, you can easily move to the sections of the song that you want to play
for practice and repeat the sections that have been marked.
You can mark up to two places using marker A and marker B.
<fig.02-01.eps>
1.
Press the [
The marker screen appears.
<Fig10.eps>
Measure No.
2.
Press the [
place a marker.
3.
Press the [-] button to place marker A.
4.
Move to the next place you want to mark and press the [+] button to place marker B.
You cannot place marker B in the same measure as, or in any measure before marker A.
<Fig2-2.eps>
You can also press the [-] and [+] buttons to place markers as a song is playing. When
a song is marked, the [
5.
Press the [
NOTE
NOTE
30
Use the marker screen to mark places in a song. When you have finished marking a
section, press the [ (Song)] button to return to the basic screen.
5 1 3 4
(Mark)] button.
Marker A Marker B
(Bwd)] or [ (Fwd)] button to move to the place where you want to
(Mark)] button indicator lights up.
(Song)] button to return to the basic display.
A marker is usually placed at the beginning of a measure. However, you can also place a
mark in the middle of a measure. For details, see "Marking the Middle of a Measure" (p. 49).
When marking audio files, place markers in terms of the time (in seconds) instead of the
measure.
When you select a different song, the markers are erased.
2