Roland MT-90U Owner's Manual page 18

MT-90U Basic Operation
1.
Press button [1] while pressing the [
The tuning screen appears, as shown below.
<Fig6.eps>
2.
Press the [
The item's name appears on the left side of the lower line on the display.
Tune
Key
Sound
3.
Press the [+] or [-] button to change the setting's value.
Pressing both buttons at the same time returns the setting to its original value.
4.
Press the [
If a song is playing, press the [
[
Play the same note on your instrument and match its pitch to the MT-90U's pitch.
5.
Press the [
The tuning pitch stops.
6.
When you have finished tuning, press the [
The basic screen appears.
These settings will remain stored even while the power is turned off. To return to the
default settings, see "Returning to the Factory Default Settings (Factory Reset)" (p. 53).
Shortcut: changing the tuning pitch
1.
18
(Bwd)] or [
Setting Description
Select the standard pitch
Select the note to use for tuning
Select the tuning sound
(Play)] button to start playing the tuning pitch.
(Play)] button to start playing the tuning pitch.
(Stop)] button to stop playing the tuning pitch.
Press the [+] or [-] button while pressing the [
The tuning screen appears.
The tuning screen appears as long as the [
Press the [-] button to lower the pitch. Press the [+] button to raise the pitch.
Release the [ (Song)] button and the basic screen reappears.
(Song)] button.
(Fwd)] button to select the item to be set.
415.3 Hz – 466.2 Hz
Pitch is set to 440.0 Hz when you turn
the power on.
A3 – A5
Note is set to A4 when you turn the
power on.
Sine, Oboe
(Stop)] button to stop the song, and then press the
(Song)] button.
Value
(Song)] button.
(Song)] button is pressed.