Changing The Volume Of The Metronome; Changing The Metronome's Time Signature - Roland MT-90U Owner's Manual

Changing the Volume of the Metronome

1.
Press the [+] or [-] button while pressing the [
While you hold the [
appears.
<Fig22.eps>
Press the [+] button to raise the volume. Press the [-] button to lower the volume.
When you release the [

Changing the Metronome's Time Signature

1.
Press the [
to select a time signature.
If a song is playing, press the [
signature.
While you hold the [
appears. When you release the [
<Fig40.eps>
Available Time Signatures
Shortcut: changing the metronome's time signature
1.
2.
The metronome volume setting also applies to the count volume (p. 29).
(Metronome)] button, the following metronome setting screen
(Metronome)] button, the basic screen appears.
The time signature cannot be changed while a song is playing. Also, the metronome
plays the song's time signature if turned on while a song is playing.
(Bwd)] or [
(Metronome)] button, the following metronome setting screen
Press the [ (Metronome)] button.
If a song is playing, press the [
metronome's time signature.
The screen cursor moves to the time signature indication.
Press the [+] or [-] button to select the time signature.
(Metronome)] button.
(Fwd)] button while pressing the [
(Stop)] button before changing the metronome's time
(Metronome)] button, the basic screen appears.
2/2, 0/4 (up beat sound only), 2/4, 3/4, 4/4, 5/4, 6/4, 7/4,
3/8, 6/8, 9/8, 12/8
(Stop)] button before changing the
MT-90U Basic Operation
(Metronome)] button
27