Probox user manual
7.6 Generic Control functions
th
The generic controller functions are handled via the 4
USB midi port. To have a match to the MCU Bank
Left/right and channel left/right functions these buttons will also send a signal on the generic USB midi port.
You have to program your DAW for that.
For Cubase such a setup will be available, as I will do that for my setup.
NOTE: If you disable the Monitor Controller function on the ProBox, you will have these buttons and Vpots as
generic controller (marked in green). For the implementation into your DAW please look to the chapter MIDI
Implementation table
Page 56 of 63