Probox d8b User Manual page 40

Probox user manual
this case you can go back to the normal baudrate with this option. Note that in this mode, the meterbridge
mode Full DAW is not supported due to bandwith limitations.
Faderfilter: here you can enable a fader touch filter (the d8b slightly changes the fader values due to stability
problems. To disable this, you can activate the fader filter). The probox will then only send fader movements, if
the change is bigger than the selected value. This helps to stop slightly fader changes, but makes smooth fader
movement more difficult.
PAGE 4/6: You can select three parameters:
Test-LED Test-Key Tst_Meter
LEDS ON [0] TEST OFF [0] Start [0]
LEDS OFF [1] TEST ON [1] 1-5 [1-5]
LEDS ON will switch on all LEDS
LEDS OFF will switch off all LEDS
Test-Key: If Test-Key is TEST ON the every button press will display 01 on the channel display. If you release the
key it will go back to 00. As long you keep it pressed you will see 01
On Tst_Meter Press Start to make a full Meterbrigde light up (including clipping LEDs). The Meterbridge will
fade down.
Page 40 of 63