Probox d8b User Manual page 44

Probox user manual
IMPORTANT: when you step out the config setup, all changes are stored, also the actual levels of the
Monitoring section (if it is enabled) except the Speakers volume. In other words, if you want to boot your
probox with a dedicated Monitoring Controller setup 2 Track Input A and as output Nearfiled speaker you
have to do this:
Make your setup on the Monitoring controller section of the d8b, setup your volumes for Talkback,
•
Phones etc..
NOTE: Volume for Speaker out, Talkback, Mono and DIM is not important as it will always be set to 0 or
Off on boot (security reasons).
Press "MEMORY B" o enter the configuration menu.
•
Press one of the three red marked buttons "ON SETUP or MEMORY A" to leave the setup and store all
•
the settings of the monitor controller.
Page 44 of 63