Mcu And Xt Emulation; Special Probox Buttons To Access Mcu And Two Xts - Probox d8b User Manual

Probox user manual

7.3 MCU and XT emulation

For detailed MCU XT functionality please refer to the dedicated DAW manual for the Mackie MCU/XT.
For Cubase/Nuendo I've attached this manual on the CD. I only support a Button map which button on the d8b
covers the buttons on the MCU/XT.

7.3.1 Special Probox Buttons to access MCU and two XTs

As we all know, one MCU and two XTs offer 3 displays with 2x52 characters. As the d8b only has one display
with 2x40 characters this display has the offer a function that makes it possible to access these 3 MCU displays.
You can access the XT1 by pressing the button "ON" . The XT2 is selected by pressing "SETUP" . "MEMORY A"
select the MCU. As we have too less characters in the display to show all messages, you can scroll the display
left and right by using the buttons "PREVIOUS" or "NEXT". You will find > or < arrows in the display that shows
you where text is hided and can be accessed by the buttons.
Additional the "PREVIOS" and "NEXT" button switches between VPots 1-4 or 5-8 . The select buttons above are
the VPot switches. The green channel LEDs will show you the selected MCU/XT in groups of 8.
NOTE: you can access the VPot switches only vie this method. The PAN Vpots of the 24 channels are equal to
the MCU, XT Vpots, so you can also use them to change parameters, but you will not have any Vpot switch
there.
Page 45 of 63