Probox d8b User Manual page 41

Probox user manual
PAGE 5/6: You can select three parameters:
TalkMode
Switch [0]
Button [1]
Talkmode:
if you want to have a latch function on the Talkback Switch you have to configure Switch:
If you only want to have the talkback session as long as you keep the button pressed select button
TalkDIM:
If you want to DIM the Main/Nearfield Speakers during Talkback then select DIM. If you do not want to DIM
the Speakers during Talkback then select off.
These function are also valid for the footswitch.
PAGE 6/6: You can select three parameters:
FdrTouch
manual
automatic
manual:
As the faders are not touch sensitive on the d8b you can use the ASSIGN button to simulate the fader touch.
press the button and keep it pressed, move the fader and release the ASSIGN button. The pressing will send a
Fader touch signal, the release will send the release message.
automatic:
Here the fader touch is send when the probox recognizes a fader movement, the release will be sent 200ms
after the last movement.
TalkDIM
off [0]
DIM [1]
Page 41 of 63