Konica Minolta AccurioPress 6136 Quick Manual page 22

3.1 Loading Paper
D
Fix the position of the side guide plates.
Place about 100 sheets of paper with the print side up. While
pressing the side guide lock release lever, align both side
guide plates to the paper, then fix their position to fit the
size indicator on the top of the side guide plates.
a: Paper size indicator
b: Side guide lock release lever
NOTICE
Load paper with the print side facing up.
E
Turn the side guide lock knobs (4 pieces) of the
side guide plates clockwise to fix them.
F
Load the remaining paper, then press the rear
guide plate against the paper.
-
Align the stack of paper to the feed roller side of the
tray.
- Press the rear guide plate against the paper.
NOTICE
Ensure that the height of the stacked paper does not go beyond the
limit mark , indicated on the side guide plates. If it does, a paper
jam may be caused. Carefully load paper to be set under the paper
control lever located at the air nozzle.
To load paper with the paper width less than 182 mm / 7.165", use
the small size guides built in the side guide plates. For information
about how to use the small size guides, refer to the HTML User's
Guide.
Be sure that the rear guide plate is securely pressed against the
paper. If there is any gap between the rear guide plate and the
paper, this machine will not be able to detect the correct paper size.
It may cause a paper feeder machine trouble.
3-4