Input Settings For The Ext Input Jack; Basic Operation; Changing A Value; Moving The Cursor - Roland GW-8 Owner's Manual

Input settings for the EXT
INPUT jack
Here you can specify whether the sound from the EXT INPUT
jack (p. 15) will be used.
You can also specify whether the Center Cancel function will
be applied to the sound from the EXT INPUT jack.
Center Cancel function minimizes the playback volume of the
sound that's heard from the center (e.g., vocal or melody
instrument).
1. Press [MENU].
2. Use [ ] [ ] to select "Ext Input Setting" then press
[ENTER].
3. Use [ ] [ ] to select the item that you want to change.
Parameter Explanation
Turns the input from the EXT
External
Input
INPUT jack ON or OFF.
Specifies whether the Center
Cancel function will be applied to
Center
the sound from the EXT INPUT
Cancel
jack (ON) or will not be applied
(OFF).
4. Turn the VALUE dial to set the value.
5. When you're finished making settings, press [EXIT].

Basic Operation

Changing a Value

Moving the cursor

A single screen or window displays multiple parameters or
items for selection. To edit the setting of a parameter, move the
cursor to the value of that parameter. To select an item, move
the cursor to that item. When selected with the cursor, a
parameter value or other selection is highlighted.
Move the cursor with the [
(cursor buttons).
Changing a value
To change the value, use the VALUE dial.
Entering numerical values ([NUMERIC])
Value
If you turn [NUMERIC] on, you'll be able to use the TONE
OFF, ON
SELECT buttons ([PIANO]–[SPECIAL]) to enter numerical values.
This is convenient when selecting Tones (p. 20), Styles (p. 26),
Performances (p. 38), or Songs (p. 30).
OFF, ON
1. Use the cursor buttons to move the cursor to the numerical
value you want to change.
2. Press [NUMERIC].
All of the TONE SELECT buttons will light.
3. Use the TONE SELECT buttons to enter the desired value,
and press [ENTER].
Introduction
], [ ], [ ] and [ ]
17