Advertisement
At-home Security
At-home security mode is to prevent opening of the door from outside while
someone is inside.
Press the [Number Pad] or
touch with a card,
Peep, Peep
then the sound for action
unavailable will be heard.
At-home security Mode Activation
At-home security Mode Deactivation
DING DONG DENG
DING DONG DING DONG
While the door is locked, press
Briefly press the [OPEN] button on the inner
[OPEN] button on the inner body
body to release it or set the manual locking
part for 3 seconds.
switch to [
●
When the At-home security mode is activated, the door cannot be
unlocked from the outside, so please be careful.
Warning
Be especially careful not to allow children to set this mode accidently from
the inside.
Deleting Registered Cards
You can delete all registered cards.
1. Pressing the [Register] Button
2. Entering the Password
DING DONG → DING DING
Open the battery cover of
When the number pad is lighted,
the inner body and press
enter the password and then
the [Register] button for 3 seconds.
press the [ ] button.
3. Entering the Number
Success:
DING DONG DENG
Fail:
DING DONG DING DONG
Enter the '88' and then
press the [ ] button.
Initialization (Password, Bluetooth, Card, Key Tag)
All registered data (password, Bluetooth, card, key tag) are deleted.
After initialization, the password is set to '1234', and the registered card, key tag,
Bluetooth data are erased. Please change password as a new one after initialization.
Pressing the [Register] Button
Entering the Numbers for Initialization
DING DONG → DING DING
→ DING DING DING DING
Open the battery cover of the
When the number pad is lighted,
inner body and press the
enter '4567890123' and then
[Register] button for 5 seconds.
press the [ ] button.
[ Settings ]
※ All settings operate only when the door opens.
Bluetooth Mode
After the Bluetooth mode is activated, can authenticate the registered Bluetooth
smartphone to open the door. The Bluetooth mode is activated by default.
[11] button: Activate the Bluetooth mode.
DING DONG
[00] button: Deactivate the Bluetooth mode.
Open the battery cover of the
Enter [11] or [00] and then press the [ ] button
inner body and briefly press
to activate or deactivate the Bluetooth mode.
the [Register] button.
Welcome Mode
The welcome function is a convenient function that automatically activates the
authorization standby mode when a user approaches the door, even before
touching the number pad.
DING DONG
Open the battery cover of
[1]+[ ] button: Welcome function on, the
the inner body and briefly
press the [Register] button.
[2]+[ ] button: Welcome function on, the
[3]+[ ] button: Welcome function off
Randomizer Mode
Press two random button before enter the password.
[7] Button : Multi-leveled Security Code
DING DONG
[9] Button : Common Mode
Open the battery cover of
Press the [ ] button after pressing
the inner body and briefly
[7] or [9] button, and the security mode
press the [Register] button.
will be set.
Double Authorization Mode
Double authorization mode requires both card and password to open the door,
ensuring more security. To setup the double authorization mode, more than
1 card must be registered.
[4] Button : Double authorization mode on
[6] Button : Double authorization mode off
DING DONG
Open the battery cover of
Press the [ ] button after pressing
the inner body and briefly
the [4] or [6] button, and the double
press the [Register] button.
authorization mode will be set.
Set up Instructions for Alarm functions
This is a basic function of the lock when a user goes out.
This function generates the alarm sound when an attempt is made to forcefully
open the door from the inside. In the alarm function, if someone tries to open
the door from the inside, 'beep- beep-' sound is generated for 5 minute
Set up the Alarm function
OR
When the door is closed, user can
set up the alarm function by pressing
and holding the [ ] button for
3 seconds until sound confirmation.
] and open the door to release it.
Prank Prevention
This function generates an alarm sound and deactivates lock operation when
it is improperly handled from the outside.
This alarm will sound if an attempt is made to open the door with an invalid
card, or if a wrong password is entered five times in a row.
The alarm sound is generated, and the lock is deactivated for 3 minutes.
While the door is in this inactive mode, a single "DING" sound is generated
every 10 seconds and seven consecutive "DINGS" will sound after 3 minutes.
Following this, the lock is released from inactive mode.
Success:
Releasing the alarm sound or emergency sound
DING DONG DENG
→ DING DING
Fail:
This function releases an alarm sound or emergency sound
DING DONG DING DONG
Inside
Open the battery cover of the inner
body and then press the [Register]
button or take out batteries.
High temperature Detection
This function generates the alarm sound when fire is detected so that the
residence can quickly respond.
High temperature Detection is operational at about 70°C±10°C
; this can vary depending on the installation environment.
When a fire breaks out, the temperature sensor detects it. The LED of the
[OPEN]button on the inner body flashes while the alarm sound is generated
for 15 seconds. After the alarm sound stops, the door is automatically opened.
(The lock resumes normal operation if the inside temperature returns to a
Success:
normal level.)
DING DONG DENG
Fail:
※ The High temperature Detection is a basic function of the lock,
DING DONG DING DONG
and cannot be released by the user.
7
Automatic/Manual Locking
The Automatic Locking mode allows for automatic locking of the door when
it is closed.
DING DONG DENG
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
Automatic Locking: The door is automatically locked 1 seconds after being closed.
Manual Locking: The door does not lock automatically, and [OPEN] button must
●
Warning
DING DONG DENG
Door Lock Time Setup
one-minute alarm function on
This function sets the time interval between the moment the open-door sensor
recognizes the door as closed and the moment deadbolt locks the door.
one-minute alarm function off
In an environment that the door closes slowly and the deadbolt jams before the
door is fully closed, the situation can be fixed by adjusting the door lock time.
DING DONG
DING DONG DENG
Open the battery cover of
Entry Mode
the inner body and briefly
press the [Register] button.
Sound Setting and Releasing
The sound that is generated when the number buttons are pressed, when the
door is locked or when the locked door is unlocked, can be set according to
the user's preference. The product is set to generate all sounds at the factory.
(Set in 1 Step)
DING DONG DENG
DING DONG
Open the battery cover of
the inner body and briefly
press the [Register] button.
10
Release the Alarm function
OR
DING DONG DENG
Place the registered card or
key tag on the card reader,
or enter the password and
then press the [ ] button.
Outside
OR
OR
Place the registered card or
key tag on the card reader,
or enter the password and
then press the [ ] button.
DING DONG DENG
[21] + [ ] Button: Automatic Locking
[22] + [ ] Button: Manual Locking
This mode is not activated when the batteries are completely
discharged.
be pressed from the inside, touch [Number Pad] to close the door.
Regardless of the Automatic/Manual locking setting, If the door is not open
after unlocked the door, the door will lock automatically after 7 seconds.
Default: 1 second
[51] : 1 second
[59] : 9 second
Enter [51] ~ [59] button,
and then press [ ] button.
DING DONG DENG
[31] + [ ] buttons: The sound of door
opening/closing and key entering is not
generated (except an alarm sound).
All sounds are generated.
[32] + [ ] Button: 1 Step
As levels increase,
[33] + [ ] Button: 2 Step
the sound becomes louder.
Replacing the Batteries
Battery Replacement Alarm Generation
If the melody of "Blues for Elise" sounds when opening the door with the
password or a card (key tag), it is time to replace the batteries.
(The low battery indicator(
) is lighted when the melody sounds.)
Replacing the Battery
1. After put up a battery holder,
insert two batteries in the lower section.
2. After put down a battery holder,
insert two batteries in the upper section.
- The unit will stop operating suddenly if the
batteries are not replaced.
Depending on battery manufacturer, date of manufacture and the user
●
environment, the duration of use may vary.
Warning
(In the case of average use, given as 10 times a day with a wireless module
not mounted, 4 AA Alkaline 1.5V batteries can last for 10 months.)
Liquid leaks from batteries can damage the product.
●
Check the batteries regularly (every 6 months).
After the battery replacement alarm has sounded, password/card
●
(key tag) information cannot be registered, changed, deleted, initialized
or configured until the batteries are replaced.
Using the Emergency Battery
If the batteries are not replaced after their replacement time comes, they will be
completely discharged and the lock will not operate.
Opening the Door Using an Emergency Battery
Purchase an emergency battery (9V) at the nearest store.
As the alkaline batteries offer longer life, they are recommended over the
manganese batteries or rechargeable ones.
OR
While contacting a 9V battery to the external power (emergency battery)
contact on the outer body for 2 seconds or longer, place the card or key
tag or enter the password.
8
Product Specifications
Item
Specifications
AA Alkaline 1.5V Batteries (LR6) 4EA (6V)
Voltage
Emergency
9V Battery (6LF22) (Separately sold)
Power Source
Operation
Electronic Control Method
Method
(Password entry or card or key tag reading or bluetooth)
0.8 kg (including both inner and outer bodies)
Weight
Outer Body
82.8mm(D) x 19mm(H)
Product
Dimensions
Inner Body
140mm(W) x 106mm(L) x 44mm(H)
The contents of this user guide are subject to change without prior notice to
●
the user in order to enhance performance of the product.
Safety Cautions
This section contains important information to ensure the user's safety
and prevent potential damage to property. Please, read this section
carefully and use the product accordingly.
Warning
The user shall not install or repair the
●
product without authorization.
Do not install the product in the place
●
where the gap between the door and
the frame is 5mm or more.
Make sure that no unauthorized person
●
has the access to the password.
Do not operate the product with wet
●
hands, and keep liquids such as water
or drinks away from the product, or the
product may malfunction or be damaged.
Do not use the excessive force or sharp
●
objects to push the lockbuttons, as this
can damage the product.
Make sure that the door is completely
●
closed when going outside. The
manufacturer does not assume the
responsibility for any harm caused by
engagement of the lock on an improperly
closed door.
Caution
This product is a keyless door lock.
Thus, if it does not work, you can damage
a part of the door lock.
You need to fully understand how to use
the manual locking switch to prepare for
an emergency.
11
AA Alkaline Batteries X 4EA
9
Long-term exposure to direct sunlight
●
may cause a crack on its touch pad.
Avoid exposure to direct sunlight during
installation.
Be sure to correctly match the poles (+/-)
●
when installing the batteries. Install the
batteries with the correct poles (+/-).
Do not use water, benzene or alcohol when
●
cleaning the product, as these fluids can
cause product malfunction.
Replace the batteries immediately after
●
the battery replacement alarm sounds.
Interference in wireless communication
●
may occur when this product is used.
According to the wireless communication
●
environment, its battery may consume
much.
During battery replacement, use a new
●
one instead of the existing battery.
12
Advertisement
