System Troubles - Radionics D2112 Diagnostic Manual

Programming
Function 8 is the Keypad Programming Mode.
For complete instructions on programming from
the keypad, see the D2112 Control/
Communicator Program Entry Guide (74-07112-
000).

System Troubles

This diagnostic check is available in the user's
Check System (Key 4) mode.
1. Exit the Diagnostics Mode.
2. Press ( 4 ).
If light 5 is lit a system trouble exists. To find
out what the trouble is,
3. Press and hold key ( 5 ). The lights indicate
the specific type of trouble:
74-07113-000-B 4/94
© 1994 Radionics, Inc., Salinas, CA. All rights reserved.
The Radionics logo is a registered trademark of Radionics, Inc.
Radionics, Inc., 1800 Abbott Street
Salinas, CA, 93901, U.S.A.
Customer Service: (800) 538-5807
Low or Missing Battery
Standby Switch Locked
Aux Power Trouble
Bell Power Trouble
8
1
2
3
4
8