Section 3: Initial Lock & User Setup – Software
Users
1. Lock Setup
First you'll need to add your lock's information, such as the serial number, name & address, to the
software. This will synchronize the software to the lock and is necessary before remote access
codes can be generated. To do this, we'll be using the iButton. This information will be taken from
the lock by touching the iButton programming key to the lock. But before we can do that, we first
need to send the lock on a "mission" to get that information. Here is how to do that...
Step 1: Select New Lock Setup Mission from the menu.
The following screen will then appear.
9