ResortLOCK LockState RL 4000 User Manual page 12

2. Add User Information:
To add/edit ibutton /keycode user, click the
screen will pop up:
Select either iButton User (to add iButton) or Key Code User (to add code) depending upon the
type of access you want to provide.
To Add iButton User:
Click ok and snap the user iButton key into the encoder (black iButton).
Click on the empty field of "Serial ID", the iButton key ID will be detected by the system
and be automatically entered.
To Add Keycode User:
1. Check the Key Code User and click ok.
2. Type in user code under Key Code field.
3. Enter the remaining User profile information as follow:
First name: Input the first name of the key owner.
Last name: Input the last name of the key owner.
Status: Active or Inactive (reserve for future use) User. We suggest not deleting any
existing user for security reason. User can change the key status from Active to Inactive for
a lost key or left employee.
Department: User can either select the pre-input Department name from the pull down list,
or input a new name in the field. The new name will be saved to the Department list once
the data saved.
Title, address: Can be entered as the key owner profile; photo of the owner can be
uploaded to the program.
4. After input all the users, click the
Step 2: Assign iButtons & User Codes to Lock
Now that we've set up our users in the software, now we need to transfer this information over to
the lock.
button in the upper menu, and following
Button and all user keys/codes will be stored.
12