ResortLOCK LockState RL4000 Quick Operation Manual

Failure to follow the exact procedure can result in
erratic lock behavior.
General Information
Reset lock: press and hold reset button (below the batteries holder)
for 10 seconds, red LED flash and beeps three times.
Default master code: 123456
Tips for a new setup
1. Change master code (Default 123456)
2. Set lock time
3. Enable auto lock /auto unlock function and set function
time (if needed)
4. Add users
How to use the code/iButton
1. code: Enter code, #
2. iButton: Touch iButton reader
3. User iButton+code: Touch iButton reader, code, #
4. One time service code: Enter ∗, code, #
Set New or Change Master Code (and not delete existing user code)
# current or default mc
Change Master Code (and delete all user code)
# current or default mc
1. Set date / time
# mc # 88
2. Enter one or more user code with no restriction (for multiple code, repeat highlight part)
# mc # 01
3. Enter one or more iButton key with no restriction (for multiple code, repeat highlight part)
# mc # 01
4. Enter one or more iButton key + user Code with no restriction (for multiple code, repeat highlight part)
# mc # 01
5. Enter one or more user code with time restriction
# mc # 01
6. Enter one or more iButton key with time restriction (for multiple code, repeat highlight part)
# mc # 01
7. Enter one or multiple ibutton + user codes with time restriction (for multiple, repeat highlight part)
# mc # 01
www.ResortLock.com
LockState RL4000 Quick Operation Guide
# 11 #
# 22 #
# yymmddhhmm
# 1-9 digits user code
# iButton key
# 1-9 digits user code
# 1-9 digits user code
# iButton key
# 1-9 digits user code
1-9 digits new mc
1-9 digits new mc
#
# # #
# #
# iButton key
(for multiple code, repeat highlight part)
(beginning time)
# yymmddhhmm
(beginning time)
yymmddhhmm
(beginning time)
# iButton key yymmddhhmm
# 1-9 digits new mc
# 1-9 digits new mc
# #
(ending time)
# yymmddhhmm
(ending time)
yymmddhhmm
#
(ending time)
# yymmddhhmm
#
#
#
#
#