ResortLOCK LockState RL 4000 User Manual page 17

The 8 digits numerical Access Code will be generated by the software. If the remote code duration
time is more than 30 days, then the access code will be 10 digits.
Your guest will then enter the access code followed by the # key to unlock the door.
Up to 4 Access Code can be created during one overlapping period.
Sub-Access Codes
Your guest can enter a sub-access code (shorter code) during their stay. Here are the steps to set the
sub-access code :
Press the "*" key till a solid green light appears on the iButton reader.
Enter the Access code followed by the # key on the lock keypad. The green light
will be flashing.
While the light is flashing, punch in a desired code (1 to 6 digits) followed by the
"#" key. Up to 10 sub-access codes could add to each lock.
Wait till green light stop blinking or enter "#" to exit the setting. punch in the sub-
access code you just assigned followed by "#" key to unlock the door.
One Time Service code
Up to 16 one time service codes can be generated within the same time window.
17