ResortLOCK LockState RL 4000 User Manual page 10

Step 2: Connect the iButton
Snap the iButton program key (purple key) into the iWire blue dot receptor. Use good force until
the iButton snaps into place.
Step 3: Issue Key
Select Daylight Saving if it is daylight savings time.
Select Classroom mode to leave the lock open after it is unlocked.
Select Storehouse mode if you want the lock to remain open after it is unlocked. (User can
always lock the door by hitting the "Lock" button on the inside of the door.
This mission will accomplish the following:
Retrieve the lock's serial number
Initialize the lock back to the manufacture default setting.
Sets the system password, and real time to the lock.
Set Daylight Saving enable or disable
Set Lock Mode to normal open or normal close
Set LED Blinking or idle
Step 4: Retrieve Serial Number From Lock
1. Before touching the iButton to the lock receptor, reset the lock by pressing the reset button
(small button just below batteries) with a pin or small screw driver for one second.
2. After depressing the button you will hear two beeps and see a solid green light on the front of
the lock.
3. While the led is solid green, touch the program key to the iButton reader on the lock (two
beeps). Now the lock information is retrieved from the lock.
10