Table of Contents
Advertisement
About this document
This document is a hardware reference manual written for SAN administrators using Blade Servers
that support the Dell 8/4Gbps Fibre Channel (FC) SAN Module. It provides information on installing,
configuring, and maintaining of the FC SAN Module.
NOTE
Throughout this document, the Dell 8/4Gbps FC SAN Module is referred to as the FC SAN Module.
How this document is organized
This document is organized to help you find information that you need as quickly as possible. The
document contains the following components:
•
•
•
•
Supported hardware and software
This document includes information specific to the Dell 8/4Gbps FC SAN Module. For more
information about deploying and managing this product, refer to the Dell 8/4Gbps FC SAN Module
Administrator's Guide.
What's new in this document
This is a new document. For further information, see the release notes for this product.
Dell 8/4Gbps FC SAN Module Hardware User's Manual
53-1001964-01
Chapter 1, "Introducing the FC SAN Module,"
basic concepts and features. This chapter also provides instructions for unpacking the FC SAN
Module from its shipping container, references to the appropriate publication for installing the
module into the Dell PowerEdge M1000e Blade Enclosure, and Fibre Channel port cabling
guidelines.
Chapter 2, "Configuring the FC SAN Module"
address, connect the module to the Ethernet network and fabric, and activate additional ports.
Chapter 3, "Operating the FC SAN Module,"
8/4Gbps FC SAN Module.
Appendix A, "8/4Gbps FC SAN Module specifications,"
describes the FC SAN Module and explains its
describes how to change the FC SAN Module's IP
provides details about operating and replacing a
is a product specification reference.
3
Advertisement
Table of Contents
