Ce Statement; Canadian Requirements; Laser Compliance - Dell FC SAN User Manual

A
Regulatory compliance

CE statement

ATTENTION
This is a Class A product. In a domestic environment, this product might cause radio interference,
and the user might be required to take corrective measures.
The standards compliance label on the FC SAN Module contains the CE mark which indicates that
this system conforms to the provisions of the following European Council directives, laws, and
standards:
•
•
•

Canadian requirements

This Class A digital apparatus meets all requirements of the Canadian Interference-Causing
Equipment Regulations, ICES-003 Class A.

Laser compliance

This equipment contains Class 1 laser products and complies with FDA Radiation Performance
Standards, 21 CFR Subchapter I and the international laser safety standard EN60825-1:1994
+A1+A2.
CAUTION
Use only optical transceivers that are qualified by Dell Inc. with this product and comply with the
FDA Class 1 radiation performance requirements defined in 21 CFR Subchapter I, and with
IEC825-2 to EN60825-1:1994 +A1+A2. Optical products that do not comply with these
standards might emit light that is hazardous to the eyes.
32
Electromagnetic Compatibility (EMC) Directive 89/336/EEC and the Complementary Directives
92/31/EEC and 93/68/EEC
Low Voltage Directive (LVD) 73/23/EEC and the Complementary Directive 93/68/EEC
EN50082-2/EN55024:1998 (European Immunity Requirements)
•
EN61000-3-2/JEIDA (European and Japanese Harmonics Spec)
•
EN61000-3-3
Dell 8/4Gbps FC SAN Module Hardware User's Manual
53-1001964-01