Connection For The Error And Alarm Output; Connection For Digital Outputs - AEG Thyro-Power Manager Operation Manual

Installation Operations Manual Thyro Power Manager

4.5.4.5 Connection for the Error and Alarm Output

The Unit possesses an error and alarm output at the terminal X8. These are designed as
potential-free optical coupler outputs.
Figure 10: Connection Diagram for the Error and Alarm Output

4.5.4.6 Connection for Digital Outputs

If the Unit is not deployed for network load optimization, but as I/O module, the 10 SYT
outputs at the terminals X3 and X4 may be used as digital outputs. These are designed as
potential-free optical coupler outputs.
Figure 11: Connection Diagram for Digital Outputs
Page 22 of 52 Version 2008-03-11