Spectracom VersaSync Quick Reference Manual page 6

2
ports (ETH0 or ETH1) to a network switch/hub, or to the PC mentioned
above (using a standard Ethernet patch cable, or a crossover cable.)
2.
USB driver
Turn on the PC; new hardware (the USB interface) will be detected. The cor
rect driver should be installed automatically. If not, download the driver
www.ftdichip.com/Drivers/VCP.htm
from
Download the driver and the instructions for your operating system
(or follow the instructions below.)
Using the Windows Device Manager , locate the new USB hard
ware under Other devices , right-click on it, and select Update
Driver Software...
Locate the downloaded driver on your local hard disk:
The driver will be installed:
CHAPTER
, and install it manually:
•
1 VersaSync Evaluation Kit Quick Reference Guide Rev. 5