Table of Contents
Advertisement
Overview
1.3.6
This feature is to alert the utility of air in the system. If the system sees no conductivity between the
electrodes an entrapped air flag is set. The alarm is then saved for a predetermined amount of time
after the alarm condition goes away and after the alarm condition is read.
1.3.7
If the system sees the presence of an external magnet for more than 15 minutes, a magnetic
tampering flag is set. The alarm is then saved for a predetermined amount of time after the alarm
condition goes away and after the alarm condition is read.
1.3.8
The system reading may be reset via the bi-directional TouchRead® connection.
1.4 iPERL System Display
The iPERL system display is a fully electronic display with embedded AMI technology. Figure 1-2 shows the
different components of the iPERL system display.
1. AMR Digits
2. Reading
3. Units of Measure
4. Flow Direction and Empty Pipe Indicator
5. Battery Life
iPERL Water Management System Technical Manual
Air In Service
Magnetic Tampering
Resettable Reading
Figure 1-2: iPERL System Display
1-3
WRMTM-40001
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the iPerl and is the answer not in the manual?
Questions and answers
how do I change the battery
The manual does not provide instructions for changing the battery in a Sensus iPERL. However, it does mention that the battery icon will turn on when the battery is low or the meter is near the end of its life. The iPERL system is designed as a sealed unit, meaning the battery is not user-replaceable. If the battery is low, you may need to contact Sensus or your utility provider for further assistance.
This answer is automatically generated
my sensus iperl water meter was installed upside down, with heat tape wrap around the top where the digital reader is to prevent freeze up, could this affect the accuracy of the meter ?
The Sensus iPERL water meter uses electromagnetic technology, which allows it to be installed in any orientation without affecting its accuracy. Therefore, installing it upside down should not impact its performance. However, wrapping heat tape around the digital reader could potentially interfere with the electronic components, display visibility, or long-term durability. It is recommended to follow the manufacturer's installation guidelines to ensure proper operation.
This answer is automatically generated
Does this meter display in hundredths of gallons?
Yes, the Sensus iPerl meter displays in hundredths of gallons, as indicated by the decimal point and register markings.
This answer is automatically generated