HPE FlexFabric 5700 Series Configuration Manual page 33

Step
leaves.
4. Create a VLAN dedicated to
ARP MAD.
5. Return to system view.
6. Enter Ethernet interface
view.
7. Assign the port to the ARP
MAD VLAN.
8. Return to system view.
9. Create the VLAN interface
and enter VLAN interface
view.
10. Assign the interface an IP
address.
11. Enable ARP MAD.
Configuring ARP MAD that uses management Ethernet ports
When you configure ARP MAD that uses management Ethernet ports, follow these restrictions and
guidelines:
Category
Ports on the intermediate
device for ARP MAD
ARP MAD VLAN
ARP MAD and feature
configuration
To configure ARP MAD that uses management Ethernet ports:
Step
1. Enter system view.
2. Assign a domain ID to the
IRF fabric.
3. Configure the IRF bridge
MAC address to change as
soon as the address owner
leaves.
Command
vlan vlan-id
quit
interface interface-type
interface-number
•
Assign the port to the VLAN as
an access port:
port access vlan vlan-id
•
Assign the port to the VLAN as a
trunk port:
port trunk permit vlan vlan-id
•
Assign the port to the VLAN as a
hybrid port:
port hybrid vlan vlan-id
{ tagged | untagged }
quit
interface
vlan-interface vlan-interface-id
ip address ip-address { mask |
mask-length }
mad arp enable
Restrictions and guidelines
Use common Ethernet ports on the intermediate device to connect the
management Ethernet ports on the IRF fabric.
On the intermediate device, create a VLAN for ARP MAD, and assign the
ports used for ARP MAD to the VLAN. On the IRF fabric, you do not need to
assign the management Ethernet ports to the VLAN.
•
Enable the IRF fabric to change its bridge MAC address as soon as the
address owner leaves.
•
If the intermediate device is also an IRF fabric, assign the two IRF fabrics
different domain IDs for correct split detection.
Command
system-view
irf domain domain-id
undo irf mac-address persistent
29
Remarks
owner leaves.
The default VLAN on the device
is VLAN 1.
N/A
N/A
The link type of ARP MAD ports
can be access, trunk, or hybrid.
The default link type of a port is
access.
N/A
N/A
By default, no IP address is
assigned to a VLAN interface.
By default, ARP MAD is
disabled.
Remarks
N/A
By default, the domain ID of an
IRF fabric is 0.
By default, the IRF bridge MAC
address remains unchanged for
6 minutes after the address
owner leaves.