6.2 Zero Adjustment
• Push "
on the LCD. Make sure that the cap is attached on the sensor.
• If the zero adjustment has not been made correctly, some digits will
appear on the LCD instead of "0.00", and the word "CAP" will also
appear on the LCD to inform you that the cap is not completely covering
the sensor.
ADJ/CAP:
6.3 Viewing and Setting the Clock
• Press
Press it again to keep changing through these values.
• This meter's clock uses 24-hour time setting.
• Hold "
• Push "
• Push "
• And press "
• Hour:
anaheimscientific.com
" button and attach the cap on the sensor. "0.00" will appear
button to see the Year, Month, Date, hour and Second.
" button and Push "
" or "
" button to change digit
" or "
" to select the setting to adjust
" button to skip from hour to day, and day to month, etc.
day:
" button to setup the clock.
Month:
Technical data subject to change without notice.
©Anaheim Scientific 2013, v20130726
8