Related Manuals for Anaheim Scientific P772
Summary of Contents for Anaheim Scientific P772
- Page 1 User Manual Model P772 Conductivity Meter 1.800.544.2843 www.calcert.com sales@calcert.com...
-
Page 2: Table Of Contents
EPAIR ALIBRATIONS 9.2 W ......................7 ARRANTY Introduction The P772 is a wide-range, pocket-sized conductivity meter perfect for use in field environments such as: Hydroponics Fish farming Agriculture Swimming pools and spas Waste water systems ... -
Page 3: Safety Summary
Do not install substitute parts or perform any unauthorized modifications to this instrument. Return the instrument to Anaheim Scientific for service and repair to ensure that safety features are maintained. The following symbols are used in this manual: This symbol on an instrument indicates that the user should refer to the operating instructions located in the manual. -
Page 4: Product Contents And Inspection
Retain the original packing in case subsequent repackaging for return is required. Use of the original packing is essential. After the mechanical inspection, verify the contents of the shipment. The items included in this package are: P772 Conductivity meter Two 3V Batteries (already installed) Instruction manual Calibration solution... -
Page 5: Device Description
Device Description 1) Battery compartment cap 2) Main display 3) Power button 4) Electrode collar 5) Electrode module 6) Electrode 7) Protective cap Operating Instructions Preparation 1. Remove the protective cap from the meter to rinse the electrode with clean water and then wipe it dry. -
Page 6: Changing The Battery
4. Plug in a new electrode module into the tester socket carefully. 5. Replace and tighten the electrode collar to make a good seal. 6. Make sure to calibrate the new electrode before usage. Technical Specifications Model P772 Conductivity Meter µS/cm Range 0 ~ 19990 µS/cm... -
Page 7: Maintenance
Service Information Service, Repair, or Calibrations The following are instructions regarding policies for servicing, repairing or calibrating Anaheim Scientific products. Turnaround time is usually less than ten (10) working days unless expedite service is requested and pre-arranged. 1.800.544.2843 www.calcert.com... -
Page 8: Warranty
, you will be asked to ship prepaid to the address below. Package the unit carefully using filler or bubble wrap, and if possible, ship in original box. Ship each unit separately. (Anaheim Scientific is not responsible for any shipping damage that may occur.) Include a packing list with each unit shipped stating what type of service is required and include the return shipping information: name, address and telephone number. - Page 9 The warranty is void if the serial number is altered, defaced or removed. Anaheim Scientific shall not be liable for any consequential damages, including without limitation damages resulting from loss of use. Some states do not allow limitations of incidental or consequential damages.
Need help?
Do you have a question about the P772 and is the answer not in the manual?
Questions and answers