Compliance Statements; Product Contents And Inspection - Anaheim Scientific H115 User Manual

• Remember to turn OFF the power after use. For long storage, remove
the battery to prevent the battery from leaking to cause damage to the
parts inside.
• Clean the device with a dry soft cloth. Wet cloths, liquid and water are
prohibited.
3

Compliance Statements

• This tester was designed in accordance with EMC Standards in force
and its compatibility has been tested in accordance with EN61326-1
(2006)
• Meets JISC1609:1993 and CNS 5119 General Class A Specifications
4

Product Contents and Inspection

This unit is tested prior to shipment. It is therefore ready for immediate use
upon receipt. An initial physical inspection should be made to ensure that
no damage has been sustained during shipment.
Inspect the packing box on receipt for any external damage. If any external
damage is evident, remove the instrument and visually inspect its case and
parts for any damage. If damage to the instrument is evident, a description
of the damage should be noted on the carrier's receipt and signed by the
driver or carrier agent. Save all shipping packaging for
inspection. Forward a report of any damage to the agent through which the
unit is procured.
anaheimscientific.com
Caution: This symbol indicates that the equipment and its
accessories are subject to special collection and disposal
procedures
Technical data subject to change without notice.
©Anaheim Scientific 2013, v20130726
3