Angle adjustment
There are seven preset positions available for angle
adjustment.
1. Rotate the knob D with one hand while supporting the
leg rest with your other hand.
2. When a suitable angle is obtained, let go off the knob
and the leg rest will lock into the desired position.
Calf pad adjustment
The calf pad E swings away during transfers and has three
height adjustment options.
Height adjustment:
1. After loosening the fixing screw C adjust to the desired
height and firmly tighten the fixing screw.
The calf pad has two depth adjustment options.
Depth adjustment:
Invacare recommends that depth adjustment is carried out
by an authorized dealer.
Foot plate adjustment
There are two different foot plates available.
•
Height adjustable foot plates
1. After loosening the fixing screw B with 5 mm
Allen key.
2. Adjust the height and tighten the fixing screw B
(5 Nm) into the desired position.
1587473-B
•
Height, depth and angle adjustable foot plates
1. After loosening the fixing screw F with 5 mm
Allen key.
2. Adjust the depth and angle positions and firmly
tighten the fixing screw F (12 Nm) into the desired
position.
Invacare recommends that footplate adjustment is carried
out by an authorized dealer.
To ensure a good position of the feet, two types
of straps can be provided; the heel strap (serial)
and the calf strap (optional) attached to the leg rest
support. Both adjustable by Velcro® fasteners.
3.9 Anti-tipper
An anti-tipper prevents the wheelchair from tipping
backwards.
WARNING!
Risk of overturning
Anti-tippers that are incorrectly set or no longer
working can lead to overturning.
– Always check that the anti-tipper is working
before using the wheelchair and have it set
or readjusted by an authorized dealer when
required.
– In some configurations, the static stability of
the wheelchair may be lower than 10°; Invacare
strongly recommends the use of anti-tipper
(available as an option).
Components and their functions
27