Motor Break-In - Robitronic Overloader 2 Instruction Manual

Motor break-in

MODE / ENTER /
CANCEL START
motor-
animation
amperage
visual
display
Set-up motor break-in
This is where you are when you first enter the
motor break-in mode.
duration
time
- With
UP
break-in
time for motor break-in from 0:01:00
voltage
to 9:59:00 in 1-minute increments.
amperage
- The buttons
motor break-in voltage from 0.1V to 8.0V
in 0.1 increments.
ENTER /
- The button starts the motor
START
break-in process.
- With the
CANCEL
corresponding to the adjustment into
the glow plug, tire heating or
display mode.
During motor break-in
count-
The motor animation symbolizes the running
down
break-in process. The adjusted duration time runs
down in a count down format. Instead of the
real break-in
adjusted motor break-in voltage now the REAL
voltage
running voltage is displayed. The actual amperage
amperage
is shown in graphic form (in relation to the
maximum of 10A) and in digital figures, also.
- The buttons
to readjust the duration time for the motor
break-in.
_
- With
motor break-in voltage during the running
process.
ENTER /
- The button has no function during the
START
running break-in process.
MODE /
- With
CANCEL
process.
16
DOWN
and you adjust the duration
_
+
and change the
MODE /
button you will switch
DOWN
and can still be used
UP
+
and you can still change the
you can always stop the break-in