Shut Down The Advanced Secure Gateway Appliance - Symantec ASG-S400-20 Product Installation Manual

Shut Down the Advanced Secure Gateway Appliance

Gracefully shut down and power off the Advanced Security Gateway appliance using the CLI shutdown command. Do
not shut down the appliance using the switch or by removing the power cables! Abruptly removing power can result in
irreparable data loss. Always use the CLI shutdown command to power down the appliance.
Remove the power cords after the appliance has been properly shut down.
To gracefully shutdown the appliance using the shutdown command:
1. Review the safety warnings before proceeding. See "Safety Warnings and Cautions" on page 31.
2. Access the ASG command-line interface using a terminal emulation program.
3. When prompted, press 1 to access the CLI.
4. Enter enable to access privileged commands.
5. Enter shutdown to turn off the appliance.
6. Unplug the power cord(s) from the AC power outlet(s).
7. Disconnect the power cord(s) from the power supply unit(s).
8. Be sure to properly ground the chassis before continuing with the installation.
Symantec Upgrade Installation Guide
8