Reinstall The S400 Series Rear Cover - Symantec ASG-S400-20 Product Installation Manual

Symantec Upgrade Installation Guide

Reinstall the S400 Series Rear Cover

The S400 Series rear cover protects the primary system components.
Review the "Safety Warnings and Cautions" on page 31 before servicing your appliance. ALWAYS observe proper
electrostatic discharge (ESD) conventions. Attach an ESD protective wrist strap to your wrist and to the chassis.
Ensure that the appliance is on an ESD-safe work surface or ground the unit appropriately. Symantec does not
assume responsibility or liability for damage resulting from ESD.
1. Reinstall the rear cover by sliding the panel towards the front of the appliance and then lock the rear cover latch.
23