Remove The S400 Series Airduct - Symantec ASG-S400-20 Product Installation Manual

Remove the S400 Series Airduct

The S400 Series is equipped with an airduct unit that directs airflow over critical system components and provides further
access to the components. .
Review the "Safety Warnings and Cautions" on page 31 before servicing your appliance. ALWAYS observe proper
electrostatic discharge (ESD) conventions. Attach an ESD protective wrist strap to your wrist and to the chassis.
Ensure that the appliance is on an ESD-safe work surface or ground the unit appropriately. Symantec does not
assume responsibility or liability for damage resulting from ESD.
Remove the rear airduct by using the finger grips and lifting straight up.
Symantec Upgrade Installation Guide
14