Scanner Is Locked. Please Try To Release Scanner Lock; Fax Memory Is Almost Full. Print Or Remove Received Fax Job; Fax Memory Is Full. Print Or Remove Received Fax Job - Samsung SL-M4080FX Service Manual

Mono laser mfp proxpress m4080 series
Table of Contents

Advertisement

4. Troubleshooting
► Error Code
S3–3122
► Error message

Scanner is locked. Please try to release scanner lock

► Symptom
Scanner lock error has occurred. CIS does not move.
► Troubleshooting method
1) Check if the CIS unit is moving when power on.
2) Check if the flat cable is connected to the CIS unit properly. Re-connect or replace the cable.
3) If the CIS is defective, replace it.
4) Check if there is any defective part in the scanner unit. (Gear, Belt, Motor etc.)
5) If the problem persists, replace the main board.
► Error Code
S4-2111
S4-2112
► Error message

Fax Memory is almost full. Print or remove received fax Job

Fax memory is full. Print or remove received fax Job

► Symptom
The fax memory is almost full.
► Troubleshooting method
1) Print or remove the received fax job in Secure Receive.
4-91
Copyright© 1995-2013 SAMSUNG. All rights reserved.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Proxpress m4080 seriesProxpress sl-m4080fx

Table of Contents