Samsung SL-M4080FX Service Manual page 154

4. Troubleshooting
• Service Functions > System Recovery
NOTE
There are 3 methods for entering System Recovery mode.
-
In case of normal booting,
▪
Enter SVC mode and select System Recovery menu.
-
In case of abnormal booting,
▪
If the HDD is broken, the machine will enter System Recovery at booting.
▪
When turning the machine on while pushing the power button on OP panel, you can enter System Recovery forcibly.
This function repairs or formats the HDD of the system. To use this function, a HDD image need to be saved in a USB
memory, and that USB memory needs to be plugged in the system before the execution.
NOTE
- Memory stick file system type : FAT16 or FAT32 not NTFS
-
Memory stick must contain the following 3 files only.
▪
unix script files x 2
▪
HDD image file x1
1) From the system recovery UI, Choose "SYS" to recover only the system partition of the HDD or "ALL" to recover
all the partition of the HDD.
2) When the system recovery UI is appeared after reboot, choose "HDD Repair" to repair any corrupted data in the
selected partition or choose "HDD Format" to format the data in the selected partition.
a) HDD Format
-
Hidden Partition : This can format and reinstall the only System Binary in HDD. User data is not deleted.
-
USB : This can format the HDD using USB stick. All data except the stored in MSOK will be deleted.
- Network : This can format the HDD using network. All data except the stored in MSOK will be deleted.
b) HDD Repair : This can restore the internal system by checking the HDD error. This is for HDD recovery itself
and irrelevant to the user data in device.
3) When pushing "Next" button, the login page for authentication will be displayed. The password will be 1934
as the factory setting password.
4) When pushing "Next" button, the following page will be displayed.
-
In case of selecting USB option :
The Next button is pressed after inserting the USB stick.
The system will check for the required packages in the USB stick. If all the packages are present in the USB
stick then the system will be directed to the confirmation page otherwise an Error page will be displayed with
an appropriate error message.
-
In case of selecting Network option :
This page contains two sections :
▪ Configure device IP address
a) Device IP: IP address for the device
b) Gateway IP: Gateway IP address for the device
c) Subnet Mask: Network Subnet Mask for the device
▪
Configure samba settings
a) Server IP : IP address of the server.
b) User ID : user ID of the server to login into the server system
4-57 Copyright© 1995-2013 SAMSUNG. All rights reserved.