Samsung SL-M4080FX Service Manual page 156

4. Troubleshooting
•
Service Functions > SFE
Special Feature Enablement (SFE) means to provide the configurable options (On/Off) in service mode for technicians
or dealers to satisfy the requirements from B2B sites easily without changing the firmware installed in a device.
NOTE
The description for some codes like a 003, 020 can not be provided by HQ R&D policy.
SFE Description
Code
001 In case of printing in directional media (Letterhead/Preprinted/Punched), the device prints as the same output
direction regardless of simplex or duplex.
003 confidential
006 The device supports only user's own email address for scan to email.
007 [PCL6] The device prints as original 1 dot line without 2 dot line compensation.
008 [PCL5] The device ignores paper size command in PRN and prints as paper size in tray.
009 PJL readback response is changed with HPOS.
1) Add <CR><LF> to EOJ response.
2) No EOJ job but EOJ response occurs.
3) Device uses Job name instead of EOJ name.
010 Maximum value of 'Power save time' is increased as 240 min.
012 If the device is in jam status, all print jobs except secure or stored jobs are deleted automatically.
013 The device ignores the USB memory stick and detects only card reader.
014 When the authenticated user uses scan to email, user's email address is added automatically.
015 The device supports to connect to LDAPs server without any certificate.
016 The device fits image appearance in report page
019 User ID is not case-sensitive for login
032 The device shall print line even though that has less than 1 dot.
033 The device shall draw Letter Gothic font as previous thickness.
035 The device shall provide auto scale for A3/Leger to A4/Letter in case of A4 Models that doesn't support
A3/Ledger size.
4-59 Copyright© 1995-2013 SAMSUNG. All rights reserved.