Setting Ethernet By Diagnostic Utility (Option); Using Usb Interface To Setup Ethernet Interface - Polaroid P420T User Manual

5.4 Setting Ethernet by Diagnostic Utility (Option)

The Diagnostic Utility is enclosed in the CD disk \Utilities directory. Users can use Diagnostic Tool to
set up the Ethernet by RS-232, USB and Ethernet interfaces. The following contents will guide users
on how to configure the Ethernet settings via these three interfaces.

5.4.1 Using USB interface to setup Ethernet interface

1. Connect the USB cable between the computer and the printer.
2. Switch on the printer.
3. Start the Diagnostic Utility by double clicking on the
4. The Diagnostic Utility default interface setting is USB. If USB interface is connected with
printer, no other settings need to be changed in the interface field.
5. Click on the "Ethernet Setup" button from "Printer Function" group in Printer Configuration
tab to setup the IP address, subnet mask and gateway for the on board Ethernet.
34
icon.