1.6 Media Specifications
Media Specifications
Label roll capacity
Media type
Media wound type
Media width
(label + liner)
Media thickness
(label + liner)
Media core diameter
Label length
Label length
(peeler mode)
Label length
(cutter mode)
Gap height
Black mark height
Black mark width
127 mm (5") OD
Continuous, die-cut, black mark, fan-fold, notch
Printing face outside wound & Printing face inside wound
Max. 118 mm (4.6")
Min. 25.4 mm (1.0")
Max. 0.254 mm (10 mil)
Min. 0.06 mm (2.36 mil)
25.4 mm~38 mm (1"~1.5")
10~2,794 mm (0.39"~110")
Note:
If your label length is less than 25.4mm (1"), we
recommend you to use the perforation at the gap for
easier tear away.
Max. 152.4 mm (6")
Min. 25.4 mm (1")
Max. 2,794 mm (110")
Min. 25.4 mm (1")
Min. 2 mm (0.09")
Min. 2 mm (0.09")
Min. 8 mm (0.31")
5