Printer Function - Polaroid P420T User Manual

5.2 Printer Function

1. Select the PC's interface connected to the printer.
The default interface setting is
USB. If printer is connected via
USB interface, no changes is
needed
2. Click the "Printer Function" button to setup.
3. The detailed functions in the Printer Function Group are listed as below.
For more information about Diagnostic Tool, please refer to the diagnostic utility quick start
guide in the CD disk \ Utilities directory.
Function
Calibrate Sensor Calibrate the sensor specified in the Printer Setup
group media sensor field
Ethernet Setup Setup the IP address, subnet mask, gateway for
the on board Ethernet
RTC Setup Synchronize printer Real Time Clock with PC
Print Test Page Print a test page
Reset Printer Reboot printer
Factory Default Initialize the printer and restore the settings to
factory default. (Please refer section 4.3.3)
Dump Text To activate the printer dump mode.
Ignore AUTO.BAS Ignore the downloaded AUTO.BAS program
Configuration Page Print printer configuration (Please refer section
4.3.2)
Password Setup Set the password to protect the settings
32
2
1
Description