Schedule Overrides - Robertshaw RS4110 User Manual

will call for heat or cool to maintain the setpoint temperature. Press
or
selected.

Schedule Overrides

When the thermostat is following a schedule, an override allows
the thermostat to function with a single setpoint for a time period.
A temporary override is entered as a setpoint for a number of hours.
A vacation override is entered as a setpoint that is held for a number
of days.
Temporary Override
1. Press
of hours.
2. Use
3. Press SET TIME to move to the hours.
4. Use
After 5 seconds the thermostat will start operation of the override. The
display will show room temperature, and the setpoint will alternate with
the number of hours remaining in the override.
The schedule will resume after the programmed override time expires.
Heat or cool must be selected. Cancel the override by pressing
START/STOP SCHEDULE.
Vacation Override
This override is programmed by pressing VACATION. The number of
days will flash.
Use and
After 5 seconds the thermostat will begin operation of the vacation
override. The display will show room temperature and the setpoint will
alternate with the number of days remaining in the override.
Use and
setpoint for future vacation overrides.
Cancel the override by pressing START/STOP SCHEDULE.
to change the setpoint. The heat or cool mode should be
or to display the flashing setpoint and the number
and to change the setpoint.
and to set the length of the override.
to change the number of days.
to change the setpoint. This will become the new
12