Dynamic Range Control (Drc) Settings - Dab - Roberts RD-41 Owner's Manual

Dynamic Range Control (DRC) settings - DAB

DRC can make quieter sounds easier to hear when your radio is used
in a noisy environment.
1. Press the Mode button until the DAB waveband is selected.
2. Press the Menu/Back button, the main Menu screen will be
selected.
3. Rotate the Tuning/Select control until "Settings" is highlighted
on the display. Press and release the Tuning/Select control.
4. Rotate the Tuning/Select control until "Radio" is highlighted on
the display. Press and release the Tuning/Select control.
5. Rotate the Tuning/Select control until "DAB DRC" is highlighted
on the display. Press and release theTuning/Select control.
6. To enable DRC rotate the Tuning/Select control until "Auto" is
shown on the display. To disable DRC rotate the Tuning/Select
control until "Disabled" is shown on the display. Press and release
the Tuning/Select control.
7. Press the Menu/Back button or select the "Back..." option to exit
back a menu or screen.
Note: Not all DAB broadcasts are able to use the DRC function. If the
broadcast does not support DRC, then the DRC setting in the radio
will have no effect.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 (Mon-Fri)
1
2
3,4
5,6
30