Table of Contents
Advertisement
Quick Links
INGICS
Ethernet Beacon Gateway
Guide
Ver.0a
iGS02E is a bridge to connect the local BLE devices, sensors, or beacons to the internet through Ethernet.
With an easy web UI interface, one can configure the internet connection to a general cloud server, like
TCP, HTTP(S), or MQTT(s). Through iGS02E, one can develop his application based on the collected BLE
devices information on the cloud . This guide is to help the user to figure out how to operate and configure
the iGS02E.
Contents
Contents
Overview
Inside the box
Ethernet
BLE
Input and Output
Default Setting button
LEDs
How to configure
Web User Interface
Network
DHCP client
STATIC IP
Applications
TCP Server
TCP Client
Request Interval
Throttle Control
HTTP POST
HTTPS
Keep-Alive
MQTT Client
MQTTS
Advanced
BLE Filter
RSSI
Payload Whitelist
Advanced Filter
Enter/Leave
Status Change
Device Key/Certification Update
System
NTP setting
Revision History
I NGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM
T ECHNOLOGY
iGS02E User Guide
1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Ingics iGS02E
Summary of Contents for Ingics iGS02E
- Page 1 Ver.0a iGS02E is a bridge to connect the local BLE devices, sensors, or beacons to the internet through Ethernet. With an easy web UI interface, one can configure the internet connection to a general cloud server, like TCP, HTTP(S), or MQTT(s). Through iGS02E, one can develop his application based on the collected BLE ...
-
Page 2: Inside The Box
Inside the box There are one iGS02E unit, one 1M USB cable, one holder, and one 2dBi dipole antenna included in one full shipping package. iGS02E is powered by a standard micro-USB cable, rated at 5V&500mA. You can power this device with a standard smartphone charger or the USB port of any host device that can support ... -
Page 3: Input And Output
Input and Output Default Setting button One button is on one side of the iGS02E as the figure showed. It is used to reset to default settings. In case you need to go back to the original settings, keep ... -
Page 4: How To Configure
DHCP client by default. To configure it, you have to connect it to a router with DHCP enabled. The first thing is to find iGS02E’s IP address in this network so that you can get into it’s webUI for ... -
Page 5: Throttle Control
IP, Netmask, Gateway, and/or DNS server. Applications TCP Server iGS02E is a TCP server. The default port is 8080 and user can also assign the port. TCP Client If there is already a TCP server, one can set ... - Page 6 Request Interval and Throttle Control, please refer to TCP client. MQTT Client MQTT server is supported by the iGS02E. In this scenario, one has to assign the MQTT host address and port number. Also the publish topic need to be assigned. Client ID is ...
-
Page 7: Advanced Filter
If payload & mask != pattern & mask, the entry will be filtered out. Some examples are provided in AP007_iGS01_payload_filter. Advanced Filter There are two more advanced filters: 7 I NGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM ... -
Page 8: Status Change
User can enable the NTP to add the timestamp information in the BLE package format as stated in page. 3. User has to set the time 8 I NGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM ... -
Page 9: Revision History
Revision History DATE REVISION CHANGES Apr 17, 2018 0a Initial release 9 I NGICS TECHNOLOGY CO., LTD. • JK.FAN@INGICS.COM • WWW.INGICS.COM ...
Need help?
Do you have a question about the iGS02E and is the answer not in the manual?
Questions and answers