Information - Neurotech AvivaTens XP Instructions For Use & Warranty

PROGRAM INFORMATION
Program
Program 1 (High Frequency Trigger):
Program 1 delivers a stimulus of 4Hz. When the Trigger button is pressed a high frequency 99Hz stimulus is
delivered. To disable High Frequency Trigger mode press the Trigger button a second time.
Program 2, 3 (Burst Mode):
Burst mode is available on Programs 2 and 3. When the Burst button is pressed Burst mode is enabled. To
disable Burst mode press the button a second time. If Burst mode is selected during Program 2, it results in a
frequency of 99Hz at a pulse width of 120 s for 3 seconds. This then returns to the normal program frequency and
pulse width for 1.5 seconds. If Burst mode is selected during Program 3, it results in a frequency of 4 Hz at
a pulse width of 120 s for 3 seconds, before returning to the normal program frequency and pulse width
23 for 3 seconds.
Frequency Pulse duration
No. (Hz) (µsec)
1 4 150
2 35 150
3 99 150
4 Channel 1: 4 150
Channel 2: 99
5 4 - 99
150
Treatment
Time (min) Burst or Trigger
open High Frequency Trigger
open Burst – Frequency of 99Hz, pulse
width 120 µsec. for 3 seconds;
Will return to program settings
for 1.5 seconds.
open Burst – Frequency of 4Hz, pulse
width 120 µsec. for 3 seconds;
Will return to program settings
for 3 seconds.
open Trigger
open
Trigger