Description Of Apparatus & Controls - Neurotech AvivaTens XP Instructions For Use & Warranty

DESCRIPTION OF APPARATUS & CONTROLS
AvivaTens XP is easy to use. All buttons are push buttons. The functions are
defined by icons printed on each button (see below).
AvivaTens XP has a built-in audio indicator that emits a high-pitched tone
when a valid button is pressed and a low tone when an invalid button is
pressed.
Buttons and Button Functions (Fig. 1)
AvivaTens XP has the following buttons and functions:
1. On / Off (Pause) Button ( )
This button switches the unit on and off and is also used to pause the treatment
session. You must press and hold the button (for 2 seconds) to switch the unit
off at the end of a treatment.
2. Intensity Controls - Channels 1 and 2 ( / )
Each intensity control governs one channel on the same side of the unit. Pressing the upper button ( ) during
treatment increases the intensity level by a factor of one for that channel. Similarly, pressing the lower button (
) decreases the intensity level by a factor of one. The numerical intensity indicator on the display changes in
single increments to indicate this.
3. Program Select Button (P)
The Program Select button enables the user to select the required treatment program. To change the
program hold down the program selection button P for at least 3 seconds.
4. Lock Button (
The Lock button allows the user to lock the intensity controls to prevent accidental changes in the intensity
level. It is also used to lock the Trigger button.
5
)
Fig. 1
LCD Display
5.
4.
3.
2.
1.